SINTEZ Kit

Color

gray with yellow

Set for protection against chemical hazards (acid solutions with concentrations up to 80% (protection class 3) and alkaline solutions with concentrations above 20%), mechanical impacts (abrasion), general industrial contamination, and static electricity. К80 - protection against acid solutions (concentrations up to 80%) Щ40 - protection against alkaline solutions with concentrations above 20% З - protection against general industrial contamination Ми - protection against mechanical impacts (abrasion) Эс - protection against static electricity

Package contents

jacket, trousers, beret

Fabric

polyester – 65%, cotton – 35%, density 250 g/m², МВО

Central fastening

on a zipper tape, covered by a one-piece placket.

Pockets

On the upper part of the left front panel there is a patch pocket, two-section, with a flap secured by a textile fastener; on the upper part of the right front panel there is a patch pocket with a flap secured by a textile fastener. The lower side pockets of the jacket have fastening on a zipper tape. The front halves of the trousers have pockets with a separate side panel; on the right back half there is a patch pocket with a flap.

Adjustment

back with a drawstring casing with stoppers.

Trouser waistband

with a fastening in the center seam on zipper tape, with a concealed fastening at the ends with a loop and button, belt loops, elastic tape at the sides.

Collar

shaped stand-up collar with a fastening on a concealed snap.

Sleeve

with an elbow patch, with an attached cuff.

Ventilation

ventilation openings in the form of slit overcast buttonholes under the armhole, on the extensions of the back halves of the trousers ventilation openings in the form of slit overcast buttonholes.

Reinforcing patches

elbow pads, knee pads.

Reflective tape

on the back, the middle parts of the sleeves, on the front and back halves of the trousers.

Beret

the lower edge of the base is gathered with an elastic band.